Growth Engine and up: your first 30 days are free, guided onboarding included.Start free

    Engagement tools

    Last updated: |For: Staff

    This page covers the tools you use to reach members outside of class: announcements, events, social media posts, the lobby social screen, your own pages inside the app, and volunteer sign-ups. Most of these are run by owners and staff; members see the results in their portal and on the kiosk.

    Announcements

    Where: Communication > Announcements
    Who: Staff (owners, admins, and instructors who can see the page)

    Announcements put a message in front of members, instructors, or everyone walking past the kiosk.

    Writing an announcement

    The editor has buttons for Bold, Italic, bulleted lists, numbered lists, and Link. A live preview sits underneath so you can see the result before you save. The editor works well on a phone.

    Links:

    • Only web, email, and phone links are allowed.
    • In the app, links open in a new tab.
    • On the kiosk, links are display-only. They show underlined, in the text colour, but cannot be tapped. This is intended, because the kiosk is a shared screen.
    • A link whose web address contains brackets (for example …/wiki/Judo_(sport)) works in full.

    Pictures: An announcement can include a photo. Use a wide image, about 3:1 (for example 1800×600). The kiosk shows a short, wide strip and cuts off the top and bottom of taller pictures.

    Where an announcement shows

    For each announcement you choose how it appears:

    • Member popup — shown to members in the portal.
    • Instructor popup — shown to staff.
    • Kiosk banner — shown on the check-in screen.

    You can limit an announcement to certain programs, and, if your school has more than one location, to certain locations (see Locations). An announcement can also carry a start date, so you can write it now and have it appear later.

    Events in Announcements

    The Events section at the bottom of the Announcements page lists the events you have posted (see the Events section below). Each event has two switches:

    • Show on kiosk — on by default. Turn it off to keep an event off the check-in screen.
    • Show as announcement — turns the event into an announcement with the title, date, place, a "Details & RSVP" link, and the event picture. It expires on the event day. It appears in the announcement list with a From event label and works like any other announcement: choose member popup, instructor popup, or kiosk banner, pick programs and locations, or edit the text. Turn the switch off to remove it.

    Events

    Where: instructor menu > Events
    Who: Owners and instructors. Whether instructors see the Events page is controlled in Access Setup > Instructor Page Access > Events (on by default).

    Events are built in GoHighLevel (GHL) and posted to the app by link. You post an event once and it shows everywhere. There are no event settings to fill in inside the app.

    Posting an event

    1. Create the event in GoHighLevel (Marketing > Events) and publish it. The Open Events in GHL button on the app's Events page takes you there.
    2. Copy the event page link. It looks like …/events/event-details/….
    3. In the app, go to the instructor menu > Events, paste the link, and press Post event.

    The instructor home page also has an Events card that reads "Post your events to the app and website".

    Where an event shows

    Once posted, the event appears:

    • on the members' Events page in the portal,
    • on the kiosk, and
    • on your school's public website (where that has been set up).

    Everything about the event — title, date, time, place, picture — is read from GoHighLevel each time it loads. To change an event, edit it in GoHighLevel. The app and website pick up the change by themselves within about a minute.

    After the event

    Events disappear from members, the kiosk, and the website the day after they end. Staff still see them on the Events page marked Past until someone clicks Remove.

    If the Events page says "These events no longer exist in GHL", the event was deleted in GoHighLevel. Click Remove to take it off the list.

    To control whether a posted event shows on the kiosk, or to turn it into an announcement, use the Show on kiosk and Show as announcement switches on the Announcements page (see the Events in Announcements section above).

    Social Posts

    Where: Communication > Social Posts
    Who: Staff

    Social Posts lets you post photos or videos with a caption to your connected social accounts without leaving the app.

    Before you start

    Your social accounts must already be connected in GoHighLevel's Social Planner. The app uses the accounts connected there. Anything beyond posting — approvals, evergreen queues, analytics — is done in Social Planner, which is one click away via the link on the page.

    Making a post

    1. Pick any combination of connected accounts.
    2. Write the message.
    3. Attach up to four photos or videos.
    4. Post now, or schedule it for later.

    File limits:

    • Photos up to 8MB.
    • Videos up to 90MB (MP4, MOV, or WebM). Instagram's own limit is about 100MB.

    Some iPhone videos do not show a moving preview in the composer. A film icon appears instead. They still upload and post normally.

    When a platform rejects a post

    The error shown is the platform's own words. Platforms differ on image sizes and aspect ratios, and Instagram requires an image or video on every post. Adjust the post and try again.

    Social Scroller

    Where (screen): Front Desk > Social Scroller
    Where (settings): Setup > App Settings > Social Scroller
    Who: Owner/Admin sets it up; staff open it on a lobby screen.

    The Social Scroller is a lobby screen that plays your published social posts on a loop. In App Settings you choose:

    • which connected social account to play,
    • how long each post stays on screen (dwell time),
    • whether videos play all the way through or follow the timer, and
    • overlay options.

    Custom Pages

    Where: Builders > Custom Pages
    Who: (Owner/Admin only). Instructors cannot create or edit pages.

    Custom Pages let you write your own pages inside the app — dojo rules, belt requirements, tournament information, a welcome letter for new parents — and put them on the member menu, the instructor menu, or both. You can have up to five pages.

    Creating a page

    1. Go to Builders > Custom Pages and create a new page.
    2. Give it a title. The page address is made from the title — a page called Principles lives at /page/principles.
    3. Write the body.
    4. Choose who sees it (below) and save.

    The address is locked once the page is created, because changing it would break any link you have already shared. Get the title right the first time.

    Rich text and source

    The body has two modes:

    • Rich text is the normal editor: headings, bold, lists, links, and images from your media library.
    • The </> button switches to source, where you can paste HTML directly — a booking calendar, a signup form, a video embed.

    Switching back to rich text can reformat hand-written HTML, so the app warns you once. If you have pasted an embed, stay in source.

    Length limit

    Each page can hold up to 28,000 characters. The counter turns red and saving is blocked above that. That is roughly twenty pages of text, but styled HTML uses it up faster than you might expect.

    Who sees the page

    There are two independent switches:

    • Show on member menu
    • Show on instructor menu

    Turn on either, both, or neither. Neither is a valid way to keep a draft that nobody sees yet.

    Limiting a page to certain programs

    Under the menu switches, tick the programs that may see the page. A new page starts with all programs ticked. This is how you show a kids' belt requirements page only to that kids' program, and a different page to adults.

    • If no programs are ticked, no member sees the page. This is deliberate.
    • The programs list comes from Program Setup. If you have not set up programs yet, the editor says so, and no member can see any page until you do (see Programs and intake).

    Check your work from a member account

    Always look at a page from a real member's account, not your own. Owners and admins see every page regardless of the menu switches and are never filtered by program, so your own view does not tell you what a member sees.

    Styling

    Apply default styling is on by default. It formats plain HTML to match the rest of the app: headings sized correctly, lists indented, text readable against your background. Turn it off only if your page carries its own styling and you want full control.

    Order, hiding and deleting

    • Pages appear at the bottom of the member menu, after Refer a Friend.
    • The Active switch hides a page without deleting it. This is useful for something seasonal, like a tournament page.
    • Deleting asks you to type the page title first, because a deleted page is gone along with its address.

    Be careful with pasted code

    Custom pages accept raw HTML exactly as you write it, with nothing stripped out. That is what makes embeds work. It also means you should only paste code you understand or trust. A widget copied from an unfamiliar website runs inside your app for every member who opens that page. If you are unsure about a snippet, ask before publishing it.

    Volunteer Board

    Where (turn on): Setup > App Settings > Features
    Where (build): instructor menu > Volunteer Board
    Where (members): Member portal > Volunteer Board
    Who: Owner/Admin builds events; members sign up; staff can assign people.

    The Volunteer Board replaces external volunteer sign-up sheets.

    Building a signup event (Owner/Admin)

    1. Turn the Volunteer Board on in App Settings > Features.
    2. Open the Volunteer Board page in the staff area and create a Signup Event.
    3. Add roles, each with a description.
    4. Add named shifts with their times.
    5. Fill in the role-by-shift grid with how many spots each one needs.

    What members do

    Members see open events on their own Volunteer Board page. They claim a spot, and they can release it if their plans change.

    A spot cannot be double-claimed. If two people tap the same last spot at the same moment, exactly one succeeds and the other sees that it is full.

    What staff can do

    • Assign people to spots, or remove them.
    • Save an event as a template to reuse next time.
    • Message every volunteer on an event by text or email in one action.

    Common questions

    Q: My announcement link doesn't work on the kiosk.
    A: That is intended. On the kiosk, links show underlined but cannot be tapped. They work normally in the app.

    Q: My announcement link stops halfway, and a stray bracket appears.
    A: Links with brackets in the address now display in full. Reopen the announcement; no edit is needed.

    Q: The picture on my kiosk announcement is cut off at the top and bottom.
    A: The kiosk shows a short, wide strip. Use a wide image of about 3:1, such as 1800×600.

    Q: My event isn't showing.
    A: Check three things: the event is published in GoHighLevel, it has been posted on the app's Events page, and it has not ended yet. If the Events page says "These events no longer exist in GHL", the event was deleted in GoHighLevel — remove it.

    Q: The app says "That doesn't look like an event URL."
    A: Paste the event page link from GoHighLevel (it looks like …/events/event-details/…), not the link to the Events list page.

    Q: I changed the event in GoHighLevel. Do I need to update the app?
    A: No. The app and website pick up the change on the next load, within about a minute.

    Q: An instructor can't see the Events page.
    A: Check Access Setup > Instructor Page Access > Events. It is on by default, but the owner can turn it off.

    Q: A platform rejected my social post.
    A: The error shown is the platform's own message. Instagram requires an image or video on every post, and platforms differ on sizes and aspect ratios. Adjust and try again.

    Q: My video upload failed.
    A: Videos must be 90MB or less, and photos 8MB or less. Trim or compress the file and try again.

    Q: My social account isn't in the list.
    A: Accounts come from GoHighLevel's Social Planner. Connect the account there first.

    Q: A member can't see my custom page.
    A: Check that Show on member menu is on, the page is Active, and the member's program is ticked. If no programs are ticked, no member sees the page. Then check from a member account — your own owner view always shows every page.

    Q: Can I change a custom page's address?
    A: No. The address is locked once the page is created so shared links keep working. To use a different address, create a new page and delete the old one.

    Q: Two members tapped the last volunteer spot at once. Who got it?
    A: Exactly one of them. The other is told the spot is full.